Gates & Gate Automation in High Point, NC
A properly designed gate makes arriving, leaving, and controlling access to your property much easier. From walk gates to automated driveway systems, we build solutions that suit your entrance, traffic pattern, and daily routine.
About Gates & Gate Automation in High Point
Your gate is the working part of a fence system, so it needs to open cleanly, close securely, and fit the way you come and go. We design and install pedestrian gates, double-drive gates, sliding gates, and automated entry systems for residential and commercial properties. Whether you need a simple side-yard gate or a controlled driveway entrance, the goal is the same: dependable access that feels easy to use and looks right with the surrounding fence.
Common signs it is time for an upgrade include sagging leaves, rusted hardware, a latch that no longer lines up, or a driveway opening that is awkward to use in bad weather. You may also be tired of getting out of the car at the end of a long day just to open the gate. In High Point, properties along Johnson Street and older homes around the College Village area often have entrances with limited clearance or uneven ground, making accurate measurement especially important. A gate should be sized and supported for real use, not merely fit into an opening.
We start by learning who uses the entrance, how often vehicles pass through, and what level of access control you want. Then we assess the opening width, approach angle, grade, available space for swing or slide travel, and the condition of any existing fence. For automation, we discuss power access, controls, safety devices, keypad or remote options, and manual release needs. You receive a plan that addresses the practical details before materials are ordered.
- Driveway gates sized for vehicle clearance
- Automation options for smoother daily arrivals
- Sturdy hinges and posts for reliable movement
- Access controls matched to your entry routine
During installation, we set the support structure, build or hang the gate, align the hardware, and test movement through its full range. Automated systems require additional attention to operator placement, safety features, controls, and final operation checks. High Point weather brings heat, rain, and seasonal debris, so we account for drainage, ground movement, and the clearance needed to keep the system operating well. Project timing varies with gate style, automation components, site preparation, and electrical coordination, and we keep you updated on the schedule.
The finished gate should feel balanced and uncomplicated. A walk gate closes without fighting the latch, a double-drive gate opens wide enough for deliveries or trailers, and an automated entrance gives you a more controlled arrival experience. On larger lots near Deep River Road or in the Wallburg direction, a gate can also establish a stronger sense of separation between private space and the street. Thoughtful placement keeps the entrance useful without making the property feel unwelcoming.
High Point Fence Pros approaches gate work with careful measuring, clear recommendations, and a focus on the components that take the most daily wear. We do not treat the gate as an afterthought to the fence; we make sure its operation is part of the design from the start. Contact our team to discuss a new gate, automation upgrade, or replacement entrance for your property.
How Much Does Gates & Gate Automation Cost in High Point?
Gates are priced by type, not by the foot. A single walk gate costs a fraction of a double drive gate, and automation adds its own system on top.
- Width and material of the gate
- Swing or slide hardware
- Gate posts sized for the weight
- For automation: the opener, power to it, controls and safety devices
We give a written estimate after measuring on site. How fence pricing works in High Point
What's Included in Gates & Gate Automation
- Measuring the opening, the approach and the grade
- Gate posts sized for the gate
- Swing or slide hardware
- For automated gates: opener, keypad or remote controls, safety devices and a manual release
- Adjustment so the gate closes and latches every time
When to Call About Gates & Gate Automation
- The gate drags, sags or will not latch
- You get out of the car to open the driveway gate
- A pool gate no longer self-closes
- The driveway opening is too narrow for a truck or trailer
Our Gates & Gate Automation Process
1. Measure the opening
Width, approach angle, grade and the room available for the gate to swing or slide.
2. Choose swing or slide
The space and the slope usually decide it.
3. Set gate posts and hang the gate
Posts are set for the weight, and the gate is hung and leveled.
4. Automate and test
Opener, controls and safety devices go in, and the gate is tested open and closed.
Gates & Gate Automation in High Point: Local Rules to Know
- Pool gates must self-close, self-latch and open away from the pool under the NC Residential Code, Appendix NC-A.
- Digging new gate posts or trenching power for an opener means an NC811 locate at least 3 full working days first.
- High Point requires a Zoning Fence Permit before a fence is installed, with a plot plan showing the fence relative to buildings, property lines, easements and the street right-of-way.
Read more: NC pool fence requirements · Calling 811 before digging · Fence permits in High Point
Everything You Need to Know
Frequently Asked Questions
These answers address the questions we hear most often when planning a deck or fence in the High Point area. Every property is different, so we are happy to discuss your specific layout and goals.
Should I choose a swing gate or sliding gate for my High Point driveway?
A swing gate needs enough clear area for each leaf to travel, while a sliding gate needs space along the fence line for the gate to retract. Driveway grade, available side room, traffic flow, and the width of the opening all matter. Sliding systems can be useful where a slope or tight approach limits swing travel. We evaluate the entrance in person before recommending the better fit.
How much does gate automation cost?
Automation costs vary based on the gate size and weight, swing or slide design, operator type, power availability, control features, and site preparation. Adding a keypad, remote controls, exit devices, or intercom-style access options also affects the estimate. An existing gate may need structural corrections before an operator is added. We provide pricing after confirming that the gate and support posts are suited to reliable automated use.
Can you automate an existing driveway gate?
In many cases, yes, but the existing gate must be in good working condition and properly supported. We check for sagging, poor alignment, inadequate posts, damaged hinges, and clearance problems before proposing automation. If the gate does not move smoothly by hand, an operator will not solve the underlying issue. Necessary repairs or a replacement can be included in a practical plan.
What maintenance does an automatic gate need?
Keep the gate path clear of leaves, gravel, branches, and landscaping that could interrupt travel. Periodically test remotes, keypads, safety devices, and the manual release according to the equipment guidance. Avoid forcing a gate that has stopped or begun moving unevenly, since that can strain components. If you notice unusual noise, slow movement, or inconsistent closing, arrange an inspection promptly.
Do pool gates have special rules in NC?
Yes. A pool barrier gate must be self-closing and self-latching and open outward away from the pool, and the code controls where the latch release sits.
What should an automatic gate have for safety?
Safety devices that stop or reverse the gate when something is in its path, and a manual release so it can be opened during a power outage.
Does a new gate need an 811 call?
If you are digging new gate posts or trenching power for an opener, yes. Notify NC811 at least 3 full working days before digging.
Make Your Backyard Work Better
Bring your deck or fence idea to a team that understands High Point properties and practical outdoor design. Contact us for a free estimate and a straightforward conversation about the next step.
(336) 833-1955Or fill out the form and we'll be in touch shortly.