Serving High Point, North Carolina & surrounding areas. Call or text (336) 833-1955 anytime

How Much Does a Fence Cost in High Point, NC?

How Much Does a Fence Cost in High Point, NC?

A fence in High Point is priced by the linear foot, so the length of the fence line sets the base number. Material moves it most. In 2026 national installed-price guides, vinyl and aluminum run about 1.5 times chain link, and wrought iron about 2 times. Height, gates, slope and removing an old fence move it from there.

Call or Text (336) 833-1955 Request Estimate Online

Fence cost by material, compared

Installed cost per linear foot relative to chain link, from midpoints in a March 2026 national price guide. Your quote depends on your site.
MaterialRelative to chain linkWorth knowing
Chain linkBaselineLowest cost for a long fence line
Pressure-treated pineAbout the sameThe usual wood privacy fence
CedarAbout 1.45xWood with more natural rot resistance
VinylAbout 1.5xWashing instead of staining
Aluminum ornamentalAbout 1.55xOpen look, a common pool fence
Wrought iron or steelAbout 2xHeaviest and most custom
CompositeAbout 2.2xHighest up front of the common materials

What changes a High Point fence price

Length of the fence line

The biggest driver. Walk the line with a tape before you call, and the estimate conversation goes faster.

Height

Going from a 4 foot to a 6 foot fence adds roughly 30 to 50 percent to material and labor in national pricing. In High Point, 8 feet is the residential maximum.

Gates

Every gate is its own line item. A single walk gate costs a fraction of a double drive gate, and automated gates are a separate system on top.

Slope and rocky ground

Difficult terrain adds roughly 15 to 30 percent. On a sloped lot the fence has to be stepped or racked to follow the grade, which means more cutting and more posts.

Removing an old fence

Tearing out and hauling away an old fence is priced per foot, on top of the new fence.

The permit

High Point requires a Zoning Fence Permit, with an application fee set by the city's Development Fee Schedule.

How to compare two fence quotes

  • Same linear footage and the same height
  • Same material grade. Pressure-treated pine and cedar are not the same fence
  • Post spacing and how the posts are set
  • Number and width of gates
  • Who removes and hauls the old fence
  • Who draws the plot plan for the permit

How to get an exact price

Every figure above is relative, because a fence price is a site price. Call or text (336) 833-1955 and we will measure the line, look at the grade and give you a written estimate. Material comparisons on this page are as of March 2026.

Last updated September 2026.

Quick Answers

Common Questions

Is a vinyl fence more expensive than wood?

Up front, yes. In 2026 national pricing, vinyl runs about 1.5 times a pressure-treated pine fence per linear foot. Vinyl skips the staining and sealing wood needs, which is the trade-off to weigh.

What is the cheapest fence to install?

Chain link has the lowest installed cost per linear foot, with pressure-treated pine wood about the same.

Does a taller fence cost more?

Yes. Going from 4 feet to 6 feet adds roughly 30 to 50 percent to material and labor.

Does a sloped yard cost more to fence?

Usually. Slopes and rocky ground add roughly 15 to 30 percent, because the fence has to be stepped or racked to follow the grade.

Make Your Backyard Work Better

Bring your deck or fence idea to a team that understands High Point properties and practical outdoor design. Contact us for a free estimate and a straightforward conversation about the next step.

(336) 833-1955

Or fill out the form and we'll be in touch shortly.

Get a Free Quote

No spam, ever.